Strøby Beach bridges

S-M-V ApS produces strøby Strand Broen, a bathing bridge in seawater-resistant aluminum with wooden deck.

The bridge is sold via the website www.stroebystrandbroen.dk Johs Johansen is for sales

In collaboration with local forces, we have developed a bathing bridge that is distinguished by being built in seawater-resistant aluminum. This makes the bridge easy to handle, making it easy to put out and take in again. All parts are easy to handle - no need for tools - everything is assembled with a stainless steel split bolt

2 people in the water and 1 person on land easily deploy the bridge in no time.

The bridge is loose on the seabed and does not require anything to be installed in the seabed to be removed later.

The bridge is divided into sections - 3 meters at a time. Adjustable legs in different lengths adapt to the seabed so that the bridge stands nicely straight.

1 section consists of 1 bridge leg, 2 legs with base plate, 2 wings, 1 baluster tube

Bracing cross, consists of 2 tubes that cross-lock a section. Min 1 cross per bridge, over 18 meters 2 crosses.

Studded tires can be purchased or you can easily make them yourself.

There is a lot of equipment for the bridge, so it's not just a bridge to swim from, but also a bridge where you can enjoy yourself, maybe have a glass of wine and watch the sunset.

Therefore, there is the option for to purchase the following equipment

Stairs for at the end of the bridge, with good non-slip steps at a good slope. Solid handrail on one side

Stairs to put on the side of the bridge wherever you want. Can be placed on all bridge legs. Good for small children swimming in shallow water

Bridgehead - extra bridge section can be connected to the outer section to double the width, providing more space for e.g. a wheelchair, table bench etc.

Fixed railing with aluminum tubes, or more simple model with rope or stainless steel wire

Table and benches can be mounted on the model with fixed railing

Kayak bridge, section that attaches to the side of 2 bridge legs

Boat mooring. Equipment so that a horizontal plank can be mounted for a small boat to rest against.

Special sack truck that can transport all parts to the bridge including stairs. When the first 2 bridge legs are in place and the bracing crosses are installed, the first bridge deck is added and all parts can then be transported to the end of the bridge and easily installed until the desired length is achieved.

Lifting device to adjust legs when the bridge is in the water.